-
Hypertech Speedometer Calibrator
If you're running non-stock tires, our Speedometer Calibrator can correct the speedometer and odometer for tires up to 54 inches (for most applications). This device is engineered for the speedometer recalibration functions of the Max Energy Programmer, but without the additional expense of the other tuning features. The Speedometer Calibrator also comes with a USB cable and a CD containing software to enable quick updates and upgrades over the internet.
How does it work? Simply plug the Speedometer Calibrator programmer into the vehicle's under-dash connector, select the tire height and new gear ratio, and in a matter of minutes, your vehicle's computer is reprogrammed for accurate speedometer and odometer readings (as required by law).
Speedometer Calibrator
If you've installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Speedometer Calibrator allows you to re-program for correct speedometer and odometer readings, as well as correct part-throttle shifting. The vehicle's computer calculates your vehicle's speed based on the diameter of the stock tires. If you've installed taller or shorter tires, or changed the rear gear ratio, the vehicle's computer doesn't know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).
Read & Clear Diagnostic Trouble Codes(DTCs)
If you get a "check engine" light or "service needed" message, the Speedometer Calibrator will allow you to read the code and gives you the ability to clear the code and turn the "check engine" light off. This allows owners to access information about the vehicle's operation without having to purchase expensive diagnostic computers or scanners used by dealership techniciansYou can then make the necessary repairs to prevent the light from coming back on.
Return To Stock Or Change Option Settings
Hypertech's Speedometer Calibrator downloads and saves the stock tuning program, then uploads your customized Speedometer Calibrator program. Before taking your vehicle into a dealership for service, always return the vehicle's computer back to the factory programming. Once you have the vehicle back from the dealership, reinstall the Speedometer Calibrator Programming as before. The Speedometer Calibrator can only be used on one (1) vehicle at a time, so if you sell your vehicle or want to use it on a friend's vehicle, simply return your vehicle to the stock program and you may then use the programmer on another vehicle that is covered in the same part number.
Internet Updateable
The Speedometer Calibrator comes with a USB cable and a CD containing software to enable quick updates or upgrades over the internet. If your vehicle has a new calibration not available when your Speedometer Calibrator was manufactured, it is possible that you will see a "Cal not found" message on the Speedometer Calibrator screen. If this occurs, you can simply update your Speedometer Calibrator with the correct new calibration via the internet. Simply connect the Speedometer Calibrator (using the provided USB cord) to your computer and go to www.hypertech.com. Then click on the Support button to get update downloads. You can also get the update downloads using the supplied CD which in addition contains an installation video and a printable version of the instruction manual.
-
About
Hypertech is a technology-driven company with a unique status in the aftermarket industry. Unlike other speed equipment manufacturers that produce hard parts like camshafts and cylinder heads, our core product is knowledge the ability to tune the complex computers that control essential functions in modern automobiles. We have invested in people, not machinery. The knowledge and skill of the Hypertech team are our most valuable assets. Our staff of engineers and technicians has degrees in a variety of disciplines, including electrical engineering, computer science, and mechanical engineering. Hypertech people know computers from the inside out! The Hypertech team is passionate about performance. We have racers, hot rodders, and performance enthusiasts on our staff. You'll find modified trucks and street machines in our employee parking lot. We build project cars and use our trucks for towing on weekends. We come from different backgrounds, but we have all learned to appreciate the tremendous power of electronic engine controls to improve performance on the street as well as on the race track.
Power Tuning is a procedure that Hypertech invented and developed to improve the performance and efficiency of computer-controlled vehicles. An internal combustion engine needs air, fuel, and spark the familiar "Combustion Triangle" illustrated here. Hypertech Power Tuning optimizes these three elements to produce maximum performance. An engine's power output is directly proportional to the amount of air and fuel that it can burn. Hypertech Power Tuning maximizes engine performance by burning the air/fuel mixture as efficiently as possible, thereby extracting maximum power. Power Tuning replaces the stock calibrations in the onboard computers used in late-model cars and trucks. These complex programs control important engine functions such as spark timing and fuel delivery. The only way to modify fuel delivery and spark timing to increase power is to optimize the tuning information supplied to the computer. This is exactly what Hypertech Power Tuning does.
It is a slow, demanding, expensive process, but it is the only way to optimize engine tuning. Only Hypertech has the personnel, the custom equipment, and the dedication to do it...for all tuning products.
Today Hypertech Power Tuning products span the spectrum of automotive technology. We continue to offer our famous Power Chips for older vehicles while constantly updating our Power Programmers for the latest cars and trucks on the market.
As the power of digital systems expands, Hypertech will continue to design and manufacture power tuning products that are on the cutting edge of technology.
AJ-USA is proud to be an authorized Hypertech dealer.
-
Return Policy
Hypertech Speedometer Calibrator is covered under our standard return policy.
- Returns/Exchanges will be only accepted within 30 days of delivery.
- If you request an exchange, we will ship your new item after we receive and process your return.
- The returned item must be in re-sellable condition. Re-sellable condition means the item is in its original condition, with no scratches, marks, or blemishes. We cannot accept any returned items that have been installed, altered or modified in any way. Determination of items returned in re-sellable condition is at the sole discretion of AJUSA.COM
- Returned item is subject to a 20% Restock Fee. Eibach, Injen & Pacesetter products are subject to a 25% Restock Fee.
- All Covercraft Sunbrella covers are non-returnable.
- All Covercraft Weathershield HP covers in blue, red, green, black, and yellow are non-returnable.
- All Covercraft Weathershield HD covers are non-returnable.
- All Edelbrock Superchargers kits are non-returnable.
- All Edelbrock Crate engines are non-returnable.
- All Edelbrock EFI kits are non-returnable.
- Power Slot Cryo Treated Slotted Rotors are not returnable except for warranty claim or shipping damage.
- Special order parts are non-returnable
- Original shipping charges are non-refundable.
- Labor charges or installation fees will not be reimbursed. Any damage incurred during installation or use of product will not be reimbursed.
- Refunds/exchanges are processed within 5-10 business days of AJUSA.COM receiving the merchandise.
- Refund will be issued in the same payment method as the purchase was made.
- Customers are responsible for shipping costs on all returns and exchanges unless the return is due to our error.
- If your order was incorrect or received with freight damage, we must be notified within 48 hours.